Welcome to the official website of Dongguan Gongfu Electronics Co., Ltd., automobile fuse, fuse, current fuse, fuse holder!
HOTLINE
0769 - 8239 1938
NewsNow:Home > News
Selection requirements for car fuse holders

Car fuse holders can be divided into fuse tubes and their fuse boxes when they are used. They are only different in appearance. There is no difference in the specific application effects. Everyone buys a car that uses a fuse tube box. There is also a safety card box. According to the size of the fuse wire, it can also be divided into small fuse boxes, medium-sized fuse boxes and new fuse boxes. Such fuse boxes of different sizes must be selected according to specific applications. Some of the differences are not too big, and they are also very guaranteed in terms of safety factor.

According to the material, the car fuse holder can also be divided into a plastic fuse box and its plastic fuse box. Although the materials are different, we can find that the effect is not the same under the application.

After a car fuse holder has been used for a period of time, it is very likely that some problems will arise. Therefore, in the case of use, it should be inspected from time to time, and its appearance should be inspected:

1. Look at the shape of the foot and its surface to see if there is rust, deformation or broken legs.

2. Check whether there are some pollutants or scratches on the surface.

3. Check whether there is deformation or cracking, etc. If you want to ensure that it has a good application effect in the application process, you must ensure that the appearance is in compliance with the regulations.

In order to better ensure that the car fuse holder has a better application effect, some of its functions should be checked:

1. The tin bar has to be welded to the sole of the seat with electric ferrochrome to see if it can be welded firmly. If it cannot be welded firmly, or the total area during the welding process is too small, then it is possible endanger the application effect of the product.

2. The fuse wire can be added immediately. If it can be just bundled, it means that its application effect is better. If it is too loose or cannot be installed, it means that the selected product does not meet the regulations. .